Parker PV2R3-52 PV2 Series Pump

Calculation factor Y:1.6; Cb min.:23.5 mm; T:84.138 mm; Calculation factor e:0.37; Da max.:882 mm; Fatigue load limit Pu:335 kN; ra max.:5.1 mm; Reference speed:380 r/min; d:723.9 mm; da max.:764 mm;

Basic dynamic load rating C:695 kN; Basic static load rating C0:400 kN; Mass rod end:6.3 kg; w:70 mm; l4 max.:246 mm; d4 ≈:82 mm; C1 max.:39 mm; G:M 52x3; d2 max.:137 mm; l7 min.:70 mm;

Basic Static Radial Load Rating Co:10200 N; D:62.0000 mm; Fillet Radius ra:1.00 mm; B:14.00 mm; Grease Speed Rating Open/Shielded n1:10000 rpm; Oil Speed Rating Open/Shielded n2:13000 rpm; Sealed Speed Rating n3:7000 rpm; d:35.000 mm; Accessories:Two Shields & Snap-R; Basic Dynamic Radial Load Ratin

N1:28.575 mm; S:4.763 mm; Housing:SAFS 536; A2:314.325 mm; P90°:320 kN; P150°:173 kN; L:679.45 mm; Stabilizing ring:SR-36-30; R2:41.275 mm; ba:75.406 mm;

Mass withdrawal sleeve:0.24 kg; Nut for removal:KM 15; d1:65 mm; B2:47 mm; B1:43 mm; G:M 75x2; G1:8 mm; d:70 mm; Hydraulic nut:HMV 15 E;

Basic Static Radial Load Rating Co:29000 N; Grease Speed Rating Open/Shielded n1:6300 rpm; Accessories:Seal & Snap-Ring; d:55.000 mm; Grease Speed Rating n1:6300 rpm; Sealed Speed Rating n3:4300 rpm; B:21.00 mm; Oil Speed Rating n2:7500 rpm; D:100.0000 mm; Fillet Radius ra:1.50 mm;

P180°:145 kN; S:4.763 mm; Housing:SSAFS 532; A2:225.425 mm; L:558.8 mm; ba:70.644 mm; H2:66.675 mm; Cap bolt, SAE grade:8; Adapter sleeve assembly:SNW 32x5.3/8; P90°:207 kN;

Basic Static Radial Load Rating Co:45500 N; Fillet Radius ra:1.50 mm; Oil Speed Rating n2:6700 rpm; d:60.000 mm; D:110.0000 mm; Basic Dynamic Radial Load Rating C:58500 N; Grease Speed Rating n1:5000 rpm; Fillet Radius rb:1.00 mm; B:22.00 mm;

Basic Static Radial Load Rating Co:81500 N; Oil Speed Rating Open/Shielded n2:4300 rpm; Accessories:Without Accessories; B:32.00 mm; d:95.000 mm; Grease Speed Rating Open/Shielded n1:3600 rpm; Sealed Speed Rating n3:2400 rpm; D:170.0000 mm; Basic Dynamic Radial Load Rating C:108000 N; Grease Speed R

Grease Speed Rating n1:13000 rpm; Basic Static Radial Load Rating Co:60000 N; B:40.00 mm; Fillet Radius rb:0.60 mm; Fillet Radius ra:1.00 mm; d:50.000 mm; D:90.0000 mm; Basic Dynamic Radial Load Rating C:60500 N; Oil Speed Rating n2:19000 rpm;

Sealed Speed Rating n3:4500 rpm; Grease Speed Rating n1:4500 rpm; Basic Dynamic Radial Load Rating C:80900 N; Accessories:Two Shields & Snap-R; B:42.90 mm; Basic Static Radial Load Rating Co:80000 N; D:100.0000 mm; Fillet Radius ra:1.50 mm; d:45.000 mm; Oil Speed Rating n2:6000 rpm;

Max. speed for Taconite seal:1150 r/min; ba:34.131 mm; Initial grease fill:87.885 g; S:4.763 mm; Mass pillow block:17.4 kg; R1:53.181 mm; RG:3/8 NPT; h:31.75 mm; H1:88.9 mm; Cap bolt:2 x 5/8-11 UNC;

ba:57.944 mm; J max.:406.4 mm; Pa:24.9 kN; PG:1/4 NPT; Bearing:22226 EK; R1:79.375 mm; Eye bolt:2 x 3/8-16 UNC; Cap bolt:3/4-10 UNC; P60°:308 kN; P90°:185 kN;

Basic dynamic load rating C:102 kN; L:187.325 mm; Mass bearing unit:3.65 kg; B:59.531 mm; Limiting speed:5300 r/min; S:0.794 mm; J min.:131.762 mm; H1:53.975 mm; da:44.45 mm; H2:33.337 mm;

M2:39 mm; Mass locking clip:0.23 kg; Hexagonal head bolt:M 16x30; M:21 mm; B:55 mm; M3:18 mm; M1:7 mm; Spring washer in accordance with DIN 128:A 16;